• Welcome to engineeringclicks.com
  • Need Help - manufacturing your own laptop and desktop parts

    Discussion in 'Manufacturers of mechanical parts' started by Jeff, Dec 3, 2016.

    1. Jeff

      Jeff New Member

      Joined:
      Dec 2016
      Posts:
      3
      Likes Received:
      0
      How do you go about manufacturing your own laptop and desktop parts (creating your own warehouse)??
       
    2.  
    3. Holiday

      Holiday New Member

      Joined:
      Dec 2016
      Posts:
      3
      Likes Received:
      0
      You might need a 3D-Printer to build it. Don't concern the pool apperance, just use 3D-Printer to establish all structure you need, then use cover layer or film to be its apperance.
       
    4. waterjet

      waterjet New Member

      Joined:
      Jan 2017
      Posts:
      3
      Likes Received:
      0
      Are you interested in Waterjet? We are the largest waterjet machine manufacturer in China, and we support 3D cutting.
      waterjet http://waterjetapw.com
       
    5. hans06032

      hans06032 Member

      Joined:
      Feb 2017
      Posts:
      8
      Likes Received:
      0
      Produce with 3D model and note the required tolerance in PDF print.
       
    6. samoel_666

      samoel_666 Member

      Joined:
      Jan 2020
      Posts:
      12
      Likes Received:
      0
      Hi
      you can create 3D models With some software such as ( Maya , solid work , ...)

      And print it with 3D prints ( J750 Stratasys with PolyJet technology )

      PolyJet technology is renowned for its outstanding realism and breathtaking aesthetics. The technology works similarly to traditional inkjet printing, but instead of jetting ink onto paper, a print head jets liquid photopolymers onto a build tray where each droplet cures in a flash of UV light.
       
    7. Oilytrunk

      Oilytrunk Well-Known Member

      Joined:
      Nov 2017
      Posts:
      96
      Likes Received:
      0
      Oh, you're here as well. Yes, it really needs expertise.
       
    8. skydelph

      skydelph Member

      Joined:
      Nov 2021
      Posts:
      6
      Likes Received:
      0
      3D printing is the best solution with some concerns to keep in mind:
      - for the start try to reuse existing parts (or buy ones that will fit);
      - optimize your printing with first trials on small parts (the quality of drawing and expected vs real result.
       
    9. Ryan_cao

      Ryan_cao Member

      Joined:
      Aug 2021
      Posts:
      5
      Likes Received:
      0

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice