• Welcome to engineeringclicks.com
  • Question about parts in Watermaker

    Discussion in 'Manufacturers of mechanical parts' started by Farenhigh, Nov 30, 2022.

    1. Farenhigh

      Farenhigh New Member

      Joined:
      Nov 2022
      Posts:
      1
      Likes Received:
      0
      Hello guys, i am wondering what are these parts name?
      [​IMG]

      The black one goes to the water tank and the white one goes into the host base. When the water tank is installed on the host base, the white part push the black part up allow water to flow through.

      Here is an overview of the water maker.

      [​IMG]
       
    2.  
    3. Erich

      Erich Well-Known Member

      Joined:
      Feb 2012
      Posts:
      294
      Likes Received:
      2
      It is a valve. It is closed when the tank is loose. So you can fill the tank at the sink. Installing the tank onto the base opens the valve.
       

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice