• Welcome to engineeringclicks.com
  • Soterix Medical: Individualized Modeling & Planning for Stroke Treatment

    Discussion in 'Webinars' started by synopsys_simpleware, Jul 16, 2020.

    1. synopsys_simpleware

      synopsys_simpleware Active Member

      Apr 2019
      Likes Received:
      Thu, Jul 30, 2020 5:00 PM - 6:00 PM BST

      This webinar will showcase how Soterix Medical is using individualized transcranial direct current stimulation (tDCS) current flow models based on stroke patient data for treatment planning.

      Part of the just concluded multi-center NIH Phase 2 trial, the webinar will first look at the methods used to create high-resolution highly accurate 3D models in Synopsys Simpleware software incorporating lesion anatomy. This is followed by discussing the electrode configuration optimization process and how individual-specific treatment is determined and finally ending with initial results from the trial.

      With this webinar, Soterix Medical and Synopsys will demonstrate the implementation of a first patient-specific modeling pipeline for clinicians with the goal to improve patient outcomes.

      In this webinar you will learn:
      • Gain a better understanding of a novel method for stroke treatment
      • Learn about the potential clinical benefits for this treatment
      • Discover how Soterix Medical has used Synopsys Simpleware software to develop a clinician modeling service

      Register here: https://register.gotowebinar.com/register/556126791558271247?source=Engineeringclicks

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice